VARIETY OF PARTS
The Hines HC-5000 is configured for balancing crankshafts weighing up to 5000lb. The balance mechanism uses a rugged hard suspension cradle system to support the weight of the workplace. Two outer and one mid bearing supports are mounted on heavy duty steel rails and are movable to accoommodate parts of varying lengths.
WINDOWS OPERATING SYSTEM
A high-resolution, flat panel, touch screen displays unbalance amount,angle and tolerance. Over 300 different workpiece configurations can be stored.
Optional Compu-Match allows the computer to communicate with the digital scale, walking the operator through all weight matching procedures.
VERTICAL DRILL
A drill will be monuted on a slide for in-place correction of unbalance, The drill is adjustable to set up a range of part dimensions and is manually fed in operation. The drill motor and the balancer drive motor are electrically interlocked to prevent simultaneous running.
SPECIFICATIONS
Balance speed: 300-400RPM
Minimum part weight: 500 lb
Part diameter at bearings: 4" to 6"
Maximum swing dianeter: 32"
Repeatability: +/-0.1 oz-in +/-7.2 g-cm
Power: 460VAC/3ph/60Hz
Measuring planes: single and two plane